Optical emission spectrometer OBLF MVS1000

Optical emission spectrometer OBLF MVS1000

The optical emission spectrometer OBLF MVS1000 is used for express analysis during melting, for incoming control of metals and alloys on all bases, for technological control of workpieces, parts, etc.

The compact stationary floor-mounted multimatrix OE spectrometer based on the latest CCD detectors is designed for all standard measurements of any alloys. With its rugged design and simple operation, it is ideal for use in a factory for both incoming inspection and material inspection.

To ensure that there is no environmental influence, the detectors and readout electronics are housed in a thermally stabilized chamber. Like all OBLF instruments, electrical sparks are generated by a digital strobe generator , with the ability to easily set the best possible excitation parameters in combination with a short analysis time.

Minimal maintenance required due to open design and self-cleaning spark stand . The highlight is the patented argon supply system, optimized to keep argon consumption to a minimum, resulting in very low operating costs.

Technical characteristics of the OBLF MVS1000 spectrometer:

Optics

  • optical system - horizontal according to the Paschen-Runge scheme
  • Rowland circle diameter – 500 mm
  • wavelength range 180-430 nm
  • Optical circuitry and recording electronics are housed in a vacuum thermally stabilized chamber with an accuracy of ±0.1°C for excellent long-term stability
  • automatic profile control by computer
  • optimal comparison lines for each wavelength range
  • high sensitivity in the UV region without sensor coating
  • impact resistance

vacuum system

  • vacuum chamber made of light alloy
  • maintenance-free 2-stage rotary pump
  • vacuum pump built into the instrument housing
  • automatic pressure regulation and stabilization

Spark generator

  • Digital strobe source with built-in multi-spark system
  • maintenance-free
  • firing frequency up to 1000 Hz
  • medium voltage unipolar discharge
  • selectable separate parameters for pre-firing and exposure
  • changeable excitation parameters and discharge characteristics via software
  • ignition voltage 20 kV

Spark table

  • pulsed argon spark table optimized for low Ar consumption
  • patented self-cleaning table
  • open stage design for ease of operation and analysis of oversized samples
  • optional adapters available for small and wire samples
  • wear-resistant tungsten electrode
  • pneumatic sample clamp for fast, convenient analysis
  • optional automatic electrode cleaning
  • consumption of about 3 liters of argon per measurement
  • spark table is not cooled by water
  • easy maintenance

Electronics

  • 16-bit AD conversion for each pixel
  • digital signal processor controls the recording sensors
  • USB interface for PC connection

Dimensions and weight

  • Dimensions, WxDxH 60 x 108 x 110 cm
  • Weight 300 kg

Power supply

  • 230 V, 50/60 Hz, 1.5 kVA
  • 200W standby

Operating conditions

  • ambient temperature 10 - 40 °C

PC hardware

  • standard computer
  • operating system MS Windows® 7 with regional and language support

Software

  • convenient routine analysis
  • freely configurable sample IDs
  • automatic control of repeatability (convergence) during analysis
  • automatic or manual averaging
  • warning when calibration range is exceeded
  • bad sample detection
  • analytical programs according to customer specifications
  • individual analysis parameters for each program
  • multivariate calibration model (including line overlay and matrix effect)
  • simple and one-time recalibration of the whole base
  • automatic program selection
  • type calibration and type measurement
  • control of the spectrometer by measuring samples
  • mean and standard deviation for selected measurements
  • automatic reminder of regular recalibration
  • control of the grade of the alloy according to the built-in database of grades
  • the ability to change the brand database
  • automatic alloy grade detection
  • printout of certificates
  • analysis database
  • statistical functions such as charts
  • automatic export of analysis data
  • system check before each analysis
  • system diagnostics module
  • maintenance reminder program, e.g. cleaning the entrance window
  • single spark processing module as an option
  • emission spectrum display and line selection module




Equipment request